What Comes Next: A Hazard and Consequence Guide for Small and Medium County Emergency Managers, from Quiet Days to Active Events

A plain guide to staying ahead of hazards and what they set in motion: a start of shift check for quiet days, and a way to keep up while an event unfolds.

1. Building the picture should not take all shift

Knowing what is happening should take minutes, not half your shift.

In a small or medium county office, the director is often the whole Situation Unit. You check news, socials, weather, fire, rivers, power, and roads, one source at a time. Then you try to hold it all in your head and decide what matters today.

A hazard is easy to see, but what it does to your roads, your power, and your people is easier to miss, especially in the middle of the night or on a busy Monday. It gets harder still when an event is under way and everything keeps changing.

This guide covers two jobs: first is the start of shift on a quiet day and the other is maintaining SA while an event unfolds. The guide gives you a simple way to do both, a way to think about each hazard and its consequences, followed by two short checklists you can use as is. The list is useful whatever tools you use.

2. Hazards and consequences, side by side

Hazards can grow into an incident, like a weather alert, a wildfire, or a rising river. Consequences are the effects that land on your desk, like a closed road, a power outage, or a shelter that needs to open. Some consequences cause their own problems and those are the second and third order effects of an event.

FEMA's National Response Framework points to building the ability to respond to cascading failures across businesses, supply chains, and infrastructure. FEMA's EOC situational awareness skillset lists estimating cascading effects, and evaluating potential consequences, as core tasks.

The start of shift check is that work in miniature. Look at the hazards and assess what each one impacts. During your active event, the process is the same, repeating as the incident progresses.

3. Weather Alerts: what to read first

Start with the alerts and read each one for what it asks of you today.

The National Weather Service (NWS) uses levels of alert. Per an NWS office explainer, a watch means the risk of a dangerous event has increased, but whether, where, or when it happens is still uncertain. It exists to give people lead time to set plans in motion. A warning or advisory means the event is imminent or already happening. A warning is for conditions that threaten life and property. An advisory is for less serious conditions that still cause significant inconvenience.

A watch is a planning item. A warning is an operations item. An advisory is a heads up that can still turn into a problem.

For each active alert, ask four things:

  • What is it, and is it a watch, a warning, or an advisory?
  • Where in the county does it apply?
  • When does it start and end?
  • Who and what is in that area?

Winter weather shows why the last question matters. NWS lists the main concerns during a winter storm at home or work as loss of heat, power, and phone service, plus a shortage of supplies (NWS winter preparedness). The same page tells travelers to call their state 511 service for road incidents and conditions. For you, an alert is the start of a list of questions about power, roads, and people.

4. Wildfires: from the conditions to the people

Check fire weather first and the fire second, because the conditions tell you how worried to be.

NWS separates two alerts. A Fire Weather Watch means be prepared: critical fire weather conditions are possible but not imminent. A Red Flag Warning means take action: NWS issues it, working with land management agencies, when a critical fire weather pattern is ongoing or expected shortly. NWS also describes an extreme fire behavior alert for fires that are likely to get out of control and are hard to predict, with fast spread and heavy spotting as examples. See NWS wildfire warnings, watches, and behavior.

Then look at the fire itself and ask what is near it. Homes? Roads you need open? Power lines? Care homes and schools? The routes people would use to leave?

Do not stop thinking about a fire when it is contained. The threat doesn’t end when a wildfire is out. Until the vegetation recovers there is an increased threat of flash flooding on burn scars (see an NWS wildfire preparedness page). A fire this season can be a flood problem later.

5. Rivers and Flooding: the level is not the whole story

A river level is a number, while the flood category tells you what the number may mean on the ground.

NWS flood terms are defined on NOAA's hydrograph page:

  • Action stage: the level where NWS or a partner needs to take some mitigation action to prepare for possible significant high water.
  • Minor flooding: minimal or no property damage, but possibly some public threat.
  • Moderate flooding: some inundation of structures and roads near the stream.
  • Major flooding: extensive inundation of structures and roads.
  • Record flooding: flooding that equals or exceeds the highest on record at that site.

Two things to note from the NWS glossary. The severity at a given stage is not necessarily the same at every location along a river. And not every category exists at every forecast point. Learn what the categories mean at the gauges in your county, not in general.

Then follow the water to the roads. NWS warns that a road under floodwater may have collapsed beneath it, and that water can hide washed out road surfaces (NWS flood safety). Treat a flooded road as a closed road. A closed road can cut off people, crews, and supplies.

6. The consequences that land on your desk

Consequences are where your day gets decided, so check them as carefully as the hazards.

FEMA describes community lifelines as the most fundamental services in a community, the ones that enable everything else, and says that when they are disrupted, decisive intervention is required (FEMA community lifelines). Its groupings include energy, transportation, food, hydration and shelter, and health and medical. Those are the things to check at the start of every shift. Here is a plain version for four of them.

Power outages. Ask where power is out, how long it has been out, and who depends on it. Then ask which key sites are on the list. Loss of power is a core winter storm concern in the NWS guidance above, and it is rarely just a comfort issue.

Roads and closures. Figure out which routes are closed, which are at risk, and whether you still have a way in and out. Check the alternate routes too. A closure matters most when it is the only way to a hospital, a shelter, or a neighborhood.

Shelters and evacuations. Ask what is open, what could need to open, and who is responsible. NWS suggests every community learn its nearby shelters and evacuation routes ahead of time (see an NWS wildfire preparedness page). Check that those basics are still true today.

Critical infrastructure. Determine the places that must stay operational and are in the path of anything on your hazard list. Think hospitals, fire stations, water facilities, and care homes. This reference check tells you what to protect and who to call first.

7. One event, many effects

An event is rarely one problem, and your SA process should treat it as a set of related effects.

Consider this illustrative scenario:

Sample County has a Red Flag Warning on a dry, windy day. A fire starts in a rural area, of course radio communications are spotty and the limited field resources are strained. Sharing information back to your EOC slips down the priority list. As that happens, gaps appear in your situational awareness, and the common operating picture starts to degrade. Your decision threshold should be actionable with 70 to 80% of the information. Decision confidence decreases the information percentages decrease. As the hours go on, the director has to keep asking where the fire is going, what might be affected: the roads people use, whether anyone will need a place to stay, whether power stays on, and later, once rain is in the forecast, whether burned ground could flood. NWS warns of that later flash flood threat on burn scars.

One hazard rarely belongs to one partner. Many agencies and partners have a piece of any event and the Emergency Manager is the one who sees across all of them, and the one who briefs it.

8. Blue Sky Days: what changed overnight and what the day looks like

Start every shift by finding out what changed and what the day looks like and do it in 10 minutes.

Run your SA process in this order. Check each box and write down anything that changes your plan. Bold lines are the quick scan. The rest of the list is a full check. On a quiet day, the quick scan is enough. It works on a phone, a laptop, or a wall screen.

Step 1: Weather Alerts

  • List every active watch, warning, and advisory for my county.
  • Mark what is new since my last check, and what was upgraded, downgraded, or cancelled.
  • For each one, note where it applies and when it starts and ends.
  • Mark any watch that could become a warning today.
  • Note who and what is in the affected area.

Step 2: Wildfires

  • Check for any Fire Weather Watch or Red Flag Warning.
  • List every active fire in or near my county, and any near a county line.
  • For each fire, note what is close: homes, roads, power lines, care homes, schools.
  • Note the likely exit routes for anyone near a fire.
  • Note any recent burn scar and any rain in the forecast.

Step 3: Rivers and Flooding

  • Check each river gauge in my county. Is it at action stage or in a flood category?
  • Note whether each one is rising, steady, or falling.
  • Name the roads, crossings, and low spots near each gauge that is up.
  • Check for any closed or barricaded road.
  • Ask what the rain forecast means for the next shift.

Step 4: Consequences

  • Power: where is it out, and which key sites are affected?
  • Roads: which routes are closed or at risk, and do I still have a way in and out?
  • Shelters and evacuations: what is open, what could open, and who has the lead?
  • Critical infrastructure: is anything on my hazard list near a hospital, fire station, water facility, or care home?
  • Law, EMS, and public health: check with the partners you already trust.

Step 5: Trust check

  • When was each item retrieved? Is anything stale?
  • If a source is quiet, do I know why? Quiet is not the same as clear.

Step 6: Brief and hand off

  • Write three lines: what is happening, what it could affect, and what I need from whom today.
  • Decide who gets a call or a message before the day starts.
  • Decide what I will look at again, and when.
  • If any answer changes my plan, stop here and move to my EOC tools to log it and assign the work.

A note on the habit. The first few times will take longer. After that, the list gets short, because on most shifts most boxes are quiet.

Print this checklist.

9. Active events: stay ahead while it unfolds

When an event is under way, your job shifts from checking to keeping up.

An active event does not hold still. Alerts can change level or end. A fire can behave erratically. A river can keep rising, or start to fall. Treat every report as a snapshot, and expect the next one to be different.

See what it may affect next

Keep asking one question: what could this reach next? Think of the roads people still need, the power that has to stay on, and the places people may need to go. Think of the key sites in the path of the event, such as hospitals, fire stations, water facilities, and care homes.

Keep the picture current

Check when each item was retrieved. If something looks quiet, find out whether it is quiet or just stale.

Keep one shared view for everyone. FEMA describes a common operating picture as a standard overview of an incident, built by compiling data from multiple sources, so that all responding entities share the same understanding of incident status (FEMA NIMS FAQ).

Brief as things change

Brief short, and brief often. Lead with what changed. Then say what it may affect, and what you need.

FEMA's incident command training builds briefings into the rhythm of an event. At the start of each operational period, the command and general staff present the objectives, review the current situation, and share communications and safety information (FEMA ICS training reference guide). Your briefs in a county office can follow the same shape: what is happening now, what comes next, and what you need.

Hand off between shifts

A shift change is where details get lost. FEMA's ICS training guide says it is critical that information is relayed and that incoming staff are properly briefed at a shift change. It warns that safety may be compromised when information is not passed along properly (FEMA ICS training reference guide).

When command itself changes hands, FEMA says the transfer should include a complete briefing of the essential information, face to face whenever possible. Everyone involved should be told when it takes effect (FEMA transfer of command).

A good handoff note is short. It says what is happening, what changed, what you are watching, and who you owe a call.

The active event checklist

Use this during an event, at each update and at each shift change.

  • What changed since the last update? What is new, upgraded, downgraded, or cancelled?
  • When was each data point retrieved? Is anything stale?
  • What could this reach next: roads, power, places people may need to go?
  • Which key sites are in the path of the event?
  • Who needs to hear about this now? Call or message them.
  • Update the brief: what changed, what it may affect, and what I need.
  • Before shift change, write the handoff: what is happening, what changed, what I am watching, and who I owe a call.
  • If any answer changes my plan, move to my EOC tools to log it and assign the work.

Print this checklist, or see the sample dashboard.

10. Where a read-only display fits

SitUnit is a read-only display for quiet days and active events. It is the place to look. Your EOC tools are where you act.

It puts hazards on one side and impacts on the other, and each item shows when it was retrieved. On a quiet day, it is your start of shift picture in one place. During an event, it helps you see the hazards and impacts and check how current each item is. Tap a hazard and the page shows that event, the impacts tied to it, and the lines on the map. Each link has a plain reason it is there. Save the map and lists as an image or a PDF to share with leadership and partners, or with the next shift.

Then go back to your EOC tools. SitUnit does not replace them. It has no incident logs, no task tracking, and no forms. It sends no alerts. The links are for planning and discussion. They are not confirmed evacuation lines or forecasts, so confirm anything important with your teams in the field.

Ask us what is live for your county today.

To see how it looks, open the sample dashboard (sample data, not live). If you want to see it with your own county, send a note and we will set up a short demo.

Sources

This guide is general information. It is not official guidance and is not endorsed by NWS, NOAA, or FEMA. Follow official warnings, your plans, and local policy.

SitUnit is a read-only display. It does not send warnings, dispatch, or give evacuation orders. In an emergency, use your official channels and call 911. Not an official county website. Fogg Holdings LLC.

v0.18.3